CAP CHRONO 10510
Mobile vehicle inspection station
Light & Heavy Vehicles | Automated | Self-Contained
The CAP10510 is a mobile, multi-purpose vehicle inspection line that is fully automated and transported by truck. Thanks to its built-in generator, it operates completely autonomously and provides access to remote or hard-to-reach locations.
- Automatic deployment and retraction
- Fully autonomous operation
- Braking, skidding, suspension, emissions, and lighting
- Connected equipment
- Air-conditioned office with PC and printer
Config :
Portable
Description
Vehicle inspections go where the vehicles are
The CAP CHRONO 10510 is a complete vehicle inspection line, suitable for both light-duty and heavy-duty vehicles, mounted on a truck. Its built-in generator makes it self-contained: it allows for inspection operations to be conducted at remote or hard-to-reach locations without the need for a fixed installation.
Automatically deployed and retracted
Deployment and retraction are automated: field setup is quick, allowing the team to focus on the inspections.
All stations on a fixed line
- Brake test stand up to 13 metric tons per axle
- Suspension test stand (EUSAMA method) and skid plate
- Gas analyzer and opacimeter for emissions
- Headlight adjuster for lighting inspection
The measuring equipment is connected, and an air-conditioned office with a PC and printer serves as the inspection control center.
Key figures
CAP CHRONO 10510
A Mixed Line
Per Axle on the Brake Test Stand
Tests: braking, wheel slip, suspension, emissions, lighting
Integrated Generator
Frequently Asked Questions About the CAP CHRONO 10510
What is the CAP CHRONO 10510?
This is a mobile, combined vehicle inspection line for light-duty and heavy-duty vehicles, fully transportable by truck.
Does the mobile testing line require an electrical connection?
No. Its built-in generator allows it to operate autonomously, even at remote locations.
What tests does the CAP CHRONO 10510 line perform?
Braking, wheel slip, suspension, emissions, and lighting, with connected measurement equipment.
How is the line installed on-site?
Deployment and retraction are automatic, which facilitates field setup.
Specifications
BRAKE TEST STAND
SUSPENSION TEST STAND
EUSAMA
SLIDING PLATE
INTERFACE
GAS ANALYZER
for gasoline and LPG enginesOPACIMETER
for diesel engines0.00 to 9.99 m⁻¹
0.01 m⁻¹
REGLOPHARE
-6/+6% (+/- 0.2%)
-90/+90°
0 / 240 lx
0 / 150 kcd
Downloads
Capelec 2026 catalogue
The full Capelec range as a flipbook. Choose the edition for your market.