CAP9020 F

Light Vehicle Brake Tester+

Extra-wide vehicles | Over 3.5 t | Robust

The CAP9020 VL+ roller brake tester checks compliance and measures the braking capacity of extra-wide vehicles weighing over 3.5 t. Measuring 292 × 69 × 28 cm, it fits into most existing spaces, whether in technical inspection centres, garages or at manufacturers’ premises.

Designed for extra-wide vehicles
PC kiosk, touchscreen and remote control
Guided vehicle inspection procedure
Galvanised chassis, high-grip rollers
Remote maintenance: updates and remote support
Options: 4x4, soft start, roller lock

Request a quote Technical data sheet

Interface :

Touch screen | Tablet | Cabinet touch screen

Function :

Braking

On Freinage

Description

The brake tester for extra-wide vehicles

4x4s, motorhomes, commercial vehicles over 3.5 t: their wide track widths require a brake tester sized accordingly. The CAP9020 VL+ checks compliance and measures the braking capacity of these vehicles, with a maximum track width of 280 cm.

Measuring 292 × 69 × 28 cm, it fits into most existing spaces, whether at technical inspection centres, garages or manufacturers’ premises.

Key figures

CAP9020 F

292cm

Length for extra-wide vehicles

280cm

Maximum accepted lane width

900daN

Braking measurement range

4kW

Engine power

Robust by design

Galvanised chassis resistant to water, sand and salt; high-grip aluminium rollers, three times lighter than steel and rust-proof; epoxy coating for reliable measurement in all weather conditions; Capelec motor designed to last.

The convenience of remote control

Touchscreen mounted on a compact stand, wireless display and remote control: the operator retains control of the test bench from the driver’s seat. The vehicle inspection procedure software guides them through the measurement process.

Maintenance and remote maintenance

The remote electrical cabinet and the CPU board designed by Capelec facilitate maintenance. Remote maintenance enables updates and remote troubleshooting.

For light vehicles, discover the CAP9010 brake tester; for heavy vehicles, the CAP9110.

For which vehicles is the CAP9020 VL+ designed?

For extra-wide vehicles over 3.5 t: 4x4s, motorhomes and commercial vehicles, with a track width of 80 to 280 cm.

What is the difference between the CAP9010 and the CAP9020 VL+?

The CAP9010 is designed for light vehicles: 232 cm long, track width from 80 to 220 cm, measures up to 750 daN. The CAP9020 VL+ is designed for extra-wide vehicles: 292 cm long, with a track width of 80 to 280 cm, and measures up to 900 daN.

Is the CAP9020 VL+ compatible with an existing booking?

Yes. Measuring 292 × 69 × 28 cm, it fits into most existing test bays.

What options are available?

The test bench can be fitted with a 4x4 function, a soft-start feature and a roller lock.