Skip to main content

Electric scooters: monitoring speed at the roadside

News - 17/11/2026

Key takeaways

  • Across Europe, law enforcement agencies are stepping up speed checks on electric scooters and e-bikes. 
  • The Capelec CAP9610 curvometer measures the actual maximum speed directly at the roadside in a matter of seconds. 
  • Compact and self-contained: a battery-powered roller bench, a carry case and a ruggedised tablet. 
  • UTAC-approved measurement, from 0 to 80 km/h, accurate to ±1 per cent or ±0.5 km/h. 
  • A single solution for electric kick scooters and e-bikes (EDPM) and scooters (L category).

In just a few years, electric scooters and e-bikes have become a common sight in every town and city. With them comes the issue of speed limits, which are sometimes significantly exceeded. This raises a question for law enforcement: how, and with what equipment, can they carry out effective on-the-spot checks?

A road safety issue 

Across Europe, the speed of electric scooters and e-bikes is limited, generally to between 20 and 25 km/h depending on the country. In France, for example, electric scooters (EDPM) must not exceed 25 km/h, and the power assistance on electric bikes must cut out at 25 km/h. However, checks regularly reveal vehicles capable of travelling at over 40 km/h, on cycle paths or amongst pedestrians.

Local and national police forces are therefore stepping up their enforcement operations. In the Netherlands and Switzerland, the police are equipped with several hundred portable roller test benches – known as curvometers or speed testers – and carry out roadside checks on electric micro-vehicles. Germany has also been testing this type of equipment since June 2025. 

Measuring actual speed, not the display 

The speedometer on an unregulated scooter may show 25 km/h whilst the vehicle is travelling much faster. Only an independent measurement can establish the actual maximum speed. This is the role of the speed tester: a roller bench on which the drive wheel rotates freely, whilst the device measures the speed reached. 

The CAP9610 from Capelec is a portable curvometer (or speed tester) that measures the actual maximum speed of electric scooters and electric bikes. Used in technical inspection centres to test scooters, it is also suitable for roadside checks.

The CAP9610: a speed tester designed for field use 

Capelec has designed the CAP9610 for roadside inspections. Compact and portable, it consists of a roller bench and a touchscreen tablet and fits into a 20kg carry case. 

It runs on battery power, without the need for a mains connection, and communicates via Bluetooth with a ruggedised tablet. It can be fitted with a lightweight ramp to facilitate vehicle access to the rollers. A scooter wedge is also available for added stability.

A single solution for multiple vehicles: electric kick scooters, electric bikes and scooters. The software offers a dedicated e-scooter mode, which can be selected on the tablet. 

A 3-step procedure: 
the inspector positions the vehicle, starts the measurement and reads the result. The test takes just a few seconds. 

Accurate measurement: 
from 0 to 80 km/h, with an accuracy of ±1 per cent or ±0.5 km/h. 

Battery life suited to operational needs: 
over 40 hours of continuous battery use. 

A simple interface: 
the screen guides the operator, with no need for complex training. 

Accurate measurement 

During an inspection, the reliability of the measurement is essential. The CAP9610 is approved by UTAC for the mandatory inspection of vehicles in the L category. Its accuracy is specified as: ±1 per cent or ±0.5 km/h, over a range of 0 to 80 km/h. 

More effective checks, everywhere 

The CAP9610 fits into a vehicle boot and can be set up quickly on a pavement, in a car park or in a public space, with or without an access ramp. This enables teams to set up more checkpoints, both in town centres and on the outskirts, and to tailor their operations to the areas where vehicles are actually travelling. 

Recognised expertise

Capelec designs and manufactures vehicle inspection equipment: gas analysers, particle counters, brake testers and headlamp beamsetters. The CAP9610 benefits from this expertise in measurement and regulatory compliance.
Are you a local police force, a local authority or a distributor? 


Contact us

Back to top