Skip to main content

Over 30 years of development

2018

Specialist equipment designed for car repair shops (Workshop series)

2021

Extended DC technology for nanoparticle number count (PNC) measurement

2026

Smart Control ergonomics and the new-generation CAP2700 headlamp beamsetter

PN Calibration
The new CAP3070 PN calibrator incorporates a salt particle generator, a variable concentrator and reference equipment.
Inspection of new lighting technologies
Compact housing, which can be integrated into ADAS gantries if required. The lens, which is 2.5 times larger, processes the light spectrum emitted by all lights, particularly LED and AFS (Matrix…) headlights.
Contactless RPM sensor
The sensor calculates engine speed (RPM) using the principle of electromagnetic induction, by detecting the high-voltage signal from the spark plug.
Smart-Control Ergonomics
The CAP2700 all-in-one headlamp beamsetter adjustment handle, combined with a new user interface and an intelligent centring system.
Video system for underbody inspection
A camera enables the operator to carry out a remote visual inspection of the underbody, particularly whilst the test plates are in motion. The system is available for both fixed and mobile test lines.
AFS headlight calibration
The system enables the calibration of the anti-glare function of adaptive headlights (AFS), such as Matrix beam systems.
Load simulation using a heavy vehicles brake tester with a hydraulic lift.
PNC: Extended DC Technology
The patented Extended DC (or ExTDC) technology measures the number of fine particles (PNC) using extended direct current.
PNC: G2 sensor
The G2 sensor measures, in real time, the concentration and size of fine particles (ultrafine particles or UFPs) emitted during combustion. It features a technological architecture patented by Pegasor, a subsidiary of Capelec. It works by drawing in the particles via a stream of clean air (Venturi effect), which protects the sensor from clogging.
Lighting measurement accuracy: Anywhere
Combining the ground irregularity compensation module (Anywhere Module) with the inclinometer built into the headlamp beamsetter enables accurate measurements to be taken anywhere in the workshop, regardless of the condition or levelness of the floor.

Frequently Asked Questions

What is Extended DC technology?

Extended Diffusion Charging is the measurement technology used in the CAP3070 particle counter. It goes beyond conventional diffusion charging thanks to a concentration compensation algorithm, ensuring accurate and repeatable particle count measurements.

Does the CAP2700 headlamp beamsetter allow for ADAS calibration?

Yes. In addition to the vehicle inspection and repair modes, the CAP2700 offers calibration of AFS and Matrix LED headlights, as well as ADAS calibration.

What is the Anywhere module used for?

The Anywhere module compensates for uneven floors and the tilt of the CAP2600 Workshop headlamp beamsetter, enabling accurate measurements throughout the workshop, without the need for a dedicated area.

Demonstration

Tell us about your business: we’ll show you the right equipment and technologies, with a demonstration if you’d like.

Become a distributor 

Join Capelec's network of qualified professionals and offer your customers reliable, recognised vehicle inspection equipment.

 

Contact us

Back to top