Skip to main content

Over 30 Years of Development

2018

Expert equipment designed for car repair shops (Workshop series)

2021

Extended DC technology for measuring nanoparticle count (PNC)

2026

Smart Control Ergonomics and the next-generation CAP2700 headlight tester

PN Calibration
The new CAP3070 PN calibrator incorporates a salt particle generator, a variable concentrator, and reference equipment.
Inspection of new lighting technologies
Compact housing, which can be integrated into ADAS gantries if needed. The lens, which is 2.5 times larger, processes the light spectrum emitted by all lights, particularly LED and AFS (Matrix…) headlights.
Non-contact RPM sensor
The sensor calculates engine speed (RPM) based on the principle of electromagnetic induction by detecting the high-voltage signal from the spark plug.
Smart-Control Ergonomics
All-in-one handle for the CAP2700 headlight tester, combined with a new user interface and an intelligent centering system.
Video system for inspecting the undercarriage
A camera allows the operator to remotely perform a visual inspection of the undercarriage, particularly while the test plates are in motion. The system is available for both fixed and mobile inspection lines.
AFS Headlight Calibration
The system enables calibration of the anti-glare function for adaptive headlights (AFS), such as Matrix beam systems.
Load simulation using a brake tester for heavy vehicles with a hydraulic lift.
PNC: Extended DC Technology
The patented Extended DC (or ExTDC) technology measures the number of fine particles (PNC) using extended direct current.
PNC: G2 Sensor
The G2 sensor measures in real time the concentration and size of fine particles (ultrafine particles or UFPs) emitted during combustion. It features a technological architecture patented by Pegasor, a subsidiary of Capelec. It works by drawing in particles via a stream of clean air (Venturi effect), which protects the sensor from clogging.
Lighting measurement accuracy: Anywhere
Combining the ground irregularity compensation module (Anywhere Module) with the inclinometer built into the headlight tester allows for precise measurements anywhere in the workshop, regardless of the condition or levelness of the floor.

Frequently Asked Questions

What is Extended DC technology?

Extended Diffusion Charging is the measurement technology used in the CAP3070 particle counter. It goes beyond conventional diffusion charging thanks to a concentration compensation algorithm, ensuring precise and repeatable particle count measurements.

Does the CAP2700 headlight tester support ADAS calibration?

Yes. In addition to vehicle inspection and repair modes, the CAP2700 offers calibration for AFS and Matrix LED headlights, as well as ADAS calibration.

What is the Anywhere module used for?

The Anywhere module compensates for uneven floors and the tilt of the CAP2600 Workshop headlight tester, enabling precise measurements throughout the entire workshop without requiring a dedicated area.

Demonstration

Tell us about your business: we’ll introduce you to the right equipment and technologies, with demonstrations available upon request.

Become a distributor 

Join Capelec's network of qualified professionals and offer your customers reliable, recognised vehicle inspection equipment.

 

Contact us

Back to top