CAP9610
Speed tester
L1e category | EDPM | Complies with CDC10
A portable curvo-meter (or speed tester), the CAP9610 measures the actual maximum speed of electric kick scooters, electric bicycles and mopeds directly at the roadside. Compact and portable, it enables law enforcement officers to detect an unregulated vehicle in a matter of seconds. UTAC-approved, it measures with an accuracy of ±1 per cent or ±0.5 km/h.
- Tablet version for mobile checks
- Measurement in 3 steps taking just a few seconds
- [X] kg carrying case
- Quickly dismantles into 2 compact parts
- Over 40 hours of continuous running time
- Chassis can be used with or without the ramps
Config :
Portable
Description
Curvometer: speed testing of e-scooters, electric bikes and scooters at the roadside
The CAP9610 speed tester checks the maximum speed of EDMRs and vehicles in the L1e category, which are limited to 45 km/h: scooters, electric bikes and mopeds. Requiring no mains connection or fixed installation, it can be used at technical inspection centres, on-site or at the roadside. Footrests and a safety platform are available as optional extras.
A system designed for use in the field
The CAP9610 consists of a roller bench and two foldable ramps, stored in a [X] kg carry case. It is battery-powered, requiring no mains connection or fixed installation, and communicates via Bluetooth with a ruggedised tablet.
- Quick set-up in two compact parts
- Non-slip ramps and adjustable locking foot
- Centring rollers to hold the vehicle in place
- Foot-operated start, programmable automatic stop
- Can be used whilst charging
A 3-step procedure
- Position the vehicle on the test bench.
- Select the mode (kick scooter, electric bike or moped) and start the measurement on the tablet.
- Read the result on the screen.
The simple, user-friendly interface guides the operator through each step.
A solution for all electric micro-vehicles
EDPM (personal motorised mobility devices), including electric scooters, with a dedicated scooter mode in the software
Electric bicycles and L1e category scooters and mopeds
The CAP9610 is UTAC-approved for two-wheelers and PMVs.
Key figures
CAP9610
Continuous operating time
Measurements without recharging (5-minute tests)
Measurement stages
Measurement range
Simple: a 3-step measurement
The CAP9610 can be set up in a matter of seconds and started by simply pressing the button integrated into the chassis with your foot. The fast and user-friendly interface guides you through the measurement in 3 steps. The system switches itself off automatically after a programmable period of inactivity.
Autonomous: over 40 hours of continuous operation
The battery allows for over 500 measurements without recharging, based on 5-minute tests. The test bench remains operational whilst charging.
Compact and safe
The chassis features a carrying handle and the ramps can be stowed vertically after use. The exit ramp has an adjustable safety stop and the chassis is fitted with re-centring rollers.
For the L category noise level testing, discover the CAP5700.
Frequently asked questions about the CAP9610 speed tester
Which vehicles can be tested using the CAP9610?
L1e mopeds, with a maximum speed not exceeding 45 km/h, an engine capacity of 50 cm³ and a power output of 4 kW, as well as electric scooters.
Is a power socket required to use the CAP9610?
No. Its battery provides over 40 hours of continuous operation, and the test bench remains usable whilst charging, which takes less than 5 hours.
What is the accuracy of the CAP9610?
The CAP9610 measures from 0 to 80 km/h with an accuracy of ±1 per cent or ±0.5 km/h.
How should the CAP9610 be transported?
The roller bench and the two fold-away ramps can be stored in a carry case, and the frame is fitted with a handle.
Specifications
CAP9610
Dimensions
Autonomy
Options
Downloads
Capelec 2026 catalogue
The full Capelec range as a flipbook. Choose the edition for your market.