CAP9610
Speedometer
Category L1e | EDPM | CDC10-compliant
The CAP9610 is a portable curvo-meter (or speedometer) that measures the actual maximum speed of electric scooters, electric bicycles, and mopeds directly on the roadside. Compact and portable, it allows law enforcement to detect an unrestricted vehicle in a matter of seconds. UTAC-certified, it measures with an accuracy of ±1% or ±0.5 km/h.
- Tablet version for mobile inspections
- Measurement in 3 steps taking just a few seconds
- [X] kg carrying case
- Quick disassembly into 2 compact parts
- Over 40 hours of continuous runtime
- Chassis can be used with or without the ramps
Config :
Portable
Description
Curvometer: speed testing of scooters, electric bicycles, and scooters on the roadside
The CAP9610 speedometer verifies the maximum speed of EDMRs and Category L1e vehicles limited to 45 km/h: scooters, electric scooters, electric bicycles, and mopeds. Requiring no AC power connection or fixed installation, it can be used at vehicle inspection centers, on-site, or roadside. Footrests and a safety platform are available as options.
A system designed for field use
The CAP9610 consists of a roller bench and two foldable ramps, stored in a [X] kg carrying case. It is battery-powered, requiring no AC power connection or fixed installation, and communicates via Bluetooth with a rugged tablet.
- Quick setup in two compact parts
- Non-slip ramps and adjustable locking foot
- Centering rollers to secure the vehicle
- Foot-operated start, programmable automatic shut-off
- Can be used while charging
A 3-step procedure
- Place the vehicle on the test stand.
- Select the mode (kick scooter, electric bike, or scooter) and start the measurement on the tablet.
- Read the result on the screen.
The simple, user-friendly interface guides the operator through each step.
A solution for all electric microvehicles
EDPM (motorized personal mobility devices), including electric scooters, with a dedicated scooter mode in the software
Electric bicycles, scooters, and mopeds in category L1e
The CAP9610 is UTAC-certified for two-wheelers and PMVs.
Key figures
CAP9610
Continuous operating time
Measurements without recharging (5-minute tests)
Measurement Steps
Measurement range
Simple: a 3-step measurement
The CAP9610 sets up in seconds and starts with a simple press of the foot on the button built into the chassis. The fast and user-friendly interface guides you through the measurement in 3 steps. The system automatically shuts down after a programmable period of inactivity.
Autonomous: Over 40 Hours of Continuous Operation
The battery allows for over 500 measurements without recharging, based on 5-minute tests. The test bench remains operational while charging.
Compact and safe
The frame features a carrying handle, and the ramps can be stored vertically after use. The exit ramp has an adjustable safety stop, and the frame is equipped with centering rollers.
For Category L sound level testing, check out the CAP5700.
Frequently Asked Questions About the CAP9610 Speedometer
Which vehicles can be inspected using the CAP9610?
Category L1e mopeds, with a maximum speed not exceeding 45 km/h, an engine displacement of 50 cm³, and a power output of 4 kW, as well as electric scooters.
Does the CAP9610 require an electrical outlet to operate?
No. Its battery provides over 40 hours of continuous runtime, and the test bench remains operational while charging, which takes less than 5 hours.
What is the accuracy of the CAP9610?
The CAP9610 measures speeds from 0 to 80 km/h with an accuracy of ±1% or ±0.5 km/h.
How should the CAP9610 be transported?
The roller bench and the two foldable ramps can be stored in a carrying case, and the frame features a handle.
Specifications
CAP9610
Dimensions
Battery life
Options
Downloads
Capelec 2026 catalogue
The full Capelec range as a flipbook. Choose the edition for your market.