CAP9010 F
Light-Duty Vehicle Brake Tester
Light vehicles | Compact | Rugged
The CAP9010 roller brake tester for light vehicles measures and tests braking performance at technical inspection centres and in repair shops. Measuring 232 × 69 × 28 cm, it fits into most existing installations, and its epoxy-coated aluminum rollers ensure reliable measurement in all weather conditions.
- Compact: fits into most existing facilities
- PC kiosk, touchscreen, and remote control
- S9010 vehicle inspection software
- Galvanized frame, epoxy-coated aluminum rollers
- Remote maintenance
- Options: 4x4, soft start, roller lock
Interface :
Touchscreen | Tablet | Cabinet touch screen
Function :
Braking
Description
The Light Vehicle Brake Tester Built to Last
The CAP9010 measures and tests the braking capacity of light vehicles, both at technical inspection centres and in repair shops. Measuring 232 × 69 × 28 cm, it fits into most existing installations—a key advantage when replacing existing equipment.
Key figures
CAP9010 F
Adapts to existing reservations
Lighter: Aluminum Rollers vs. Steel
Maximum Axle Load
Braking Measurement Range
Materials selected for harsh environments
The galvanized chassis is resistant to water, sand, and salt. The aluminum rollers, which are three times lighter than steel rollers, make handling easier and do not rust; their epoxy coating ensures accurate measurements regardless of weather conditions. The Capelec motor is robust and built to last.
Remotely controlled, guided by software
The touchscreen is mounted on a compact stand. Thanks to the wireless screen and remote control, the operator controls the test bench from the vehicle, while the vehicle inspection software guides them through the measurement process.
Ease of maintenance
The remote electrical cabinet and the CPU board—designed and optimized by Capelec—simplify maintenance; remote maintenance ensures updates and remote troubleshooting.
For extra-wide vehicles, discover the CAP9020 VL+ brake tester; for heavy vehicles, the CAP9110. To also test the suspension and wheel slip, choose the CAP9010 multifunction test stand.
Frequently Asked Questions About the CAP9010 Brake Tester
Is the CAP9010 compatible with an existing reservation?
Yes. With dimensions of 232 × 69 × 28 cm, the CAP9010 brake tester fits into most existing test bays.
What is the capacity of the CAP9010 brake tester?
The CAP9010 supports up to 4 metric tons per axle, measures from 0 to 750 daN at a test speed of 5 km/h, for a track width of 80 to 220 cm.
Why aluminum rollers?
Aluminum rollers are three times lighter than steel rollers and do not rust. Their epoxy coating ensures accurate measurements regardless of weather conditions.
What options are available?
The test stand can be equipped with a 4x4 function, a soft start feature, and a roller lock.
Specifications
Brake tester
Interface
Standards
AWS
GIEG Lan
Options
Applications
Vehicle inspection
CAR REPAIR SHOPS & GARAGES
MANUFACTURERS & INDUSTRIAL COMPANIES
Downloads
Capelec 2026 catalogue
The full Capelec range as a flipbook. Choose the edition for your market.