CAP2500
Electronic headlamp beamsetter with photodiodes
Connected | Accurate | Guided
The CAP2500 electronic headlamp beamsetter with photodiodes checks the alignment of main beam, dipped beam and fog lights. Its software guides the operator step by step, both during vehicle inspection and repairs, and its LCD screen displays values and instructions in several languages.
- Adjustment of halogen, xenon and LED headlights
- Positioning assistance and alignment laser
- Multilingual LCD screen
- Wi-Fi and Bluetooth wireless communication, RS232 port
- 1.80 m aluminium column
- 3-wheel base or rail mount
Connection :
Bluetooth | RS232
Function :
Folding | Light intensity
Description
A precise electronic headlamp beamsetter, for both vehicle inspection and workshop use
The CAP2500 measures headlamp alignment using a photodiode sensor: the operator reads the cut-off value and light intensity directly, without having to visually interpret a test chart.
Its on-board software adapts to the task at hand. At a technical inspection centre, it guides the user through the inspection procedure; in a workshop, it assists with adjusting dipped-beam, main-beam and fog lights to the correct settings.
Key figures
CAP2500
Aluminium test stand for all vehicles
Measurement accuracy of the folding mechanism
Measured luminous intensity
Easy to move around the workshop
Assisted positioning for reliable measurement
An accurate measurement starts with a correctly aligned device. The CAP2500 offers assistance to align the optical unit with the vehicle’s axis, position it facing the headlamp, and then take the measurement. The LCD screen displays values and instructions in the operator’s language.
Available all day, anywhere in the workshop
The battery offers a long runtime and recharges quickly: no cables are left lying on the floor. The 3-wheeled base moves easily from one workstation to another; for a fixed installation, it can be replaced by a base designed for rails.
Integrated into your environment
Its RS232, Wi-Fi and Bluetooth ports make it easy to connect to other equipment and to the centre’s or workshop’s IT system.
Frequently asked questions about the CAP2500
Which headlights can the CAP2500 headlamp beamsetter test?
The CAP2500 tests and adjusts halogen, xenon and LED headlamps: dipped beam, main beam and fog lights. For Matrix LED or AFS headlamps, Capelec offers the CAP2600 camera-based headlamp beamsetter.
Is the CAP2500 suitable for vehicle inspection and repair?
Yes. Its software carries out the inspection procedure at technical inspection centres and provides step-by-step guidance on headlamp alignment in car repair shops or garages.
What is the measurement accuracy of the CAP2500?
The CAP2500 measures camber from +2 to -4 per cent with an accuracy of ±0.2 per cent, and luminous intensity from 0 to 125 kcd with an accuracy of 10 per cent.
Can the CAP2500 headlamp beamsetter operate on rails?
Yes. The CAP2500 is mounted on a three-wheeled base, which can be replaced by a base designed for use on rails where the test station is equipped with them.
Specifications
Specifications
Long battery life
Fast charging
Folding
Light intensity
RS232
WIFI
BT
Specific requirements
Measurement range: from +2 to -4%
Accuracy: +/- 0.2%
Measurement range: 0 to 125 kcd
Accuracy: 10%
Standards
GIEG Lan
OTC Lan
NFR63-108
Options
Applications
CAR REPAIR SHOPPS & GARAGES
Checking the optical alignment
Checking bulb intensity
Adjusting dipped-beam, main-beam and fog lights
MANUFACTURERS & INDUSTRIAL COMPANIES
Checking settings
Wheel alignment
VEHICLE INSPECTION
Verification of setting compliance
Inspection of dipped beam, main beam and fog lights
Downloads
Capelec 2026 catalogue
The full Capelec range as a flipbook. Choose the edition for your market.