Particle measurement: choosing the right technology

Capelec has developed an innovative, less complex and cost-effective technology for its new CAP3070 PN Particle counter. It guarantees reliable results and rapid measurement.

Reduced maintenance and running costs

Combined with a patented design, the technology behind the CAP3070 PN Counter is innovative. It minimises clogging, as well as operating and maintenance costs.

The straight-through design reduces the risk of the filter or pump becoming clogged. The sensor remains clean throughout the operating cycle.

Particles in the fumes are drawn in by the Venturi effect, a flow of clean air, and become electrostatically charged at the sensor inlet. The particle concentration is measured as the gas passes through the sensor.

Reduced maintenance and consumables costs:

    • The sensor remains clean thanks to the flow of clean air

    • No clogging of the filter or pump

    • No flammable operating fluid

    • No dilution

    • No compressed air.

Technology suited to intensive workshop use

The CAP3070 PN particle counter is fast and robust, designed to last.

It is not easily affected by repeated handling or vibrations. It withstands prolonged use.

Measurements are taken in under 30 seconds, for greater efficiency and productivity.

Designed to reduce operator strain and protect motors, the Capelec PN Counter carries out measurements at idle speed, without acceleration. It is quiet and produces fewer emissions.

Extended DC: higher measurement accuracy

Used for measurement, PEGASOR’s G2 sensor utilises a wide dynamic measurement range, enabling much more accurate results for equivalent samples.

Extended Diffusion Charging (Ext DC) technology thus prevents measurement discrepancies that can sometimes be caused by dilution (the method used by CPC technology).

Find out more about the CAP3070 PN