CAP2100
Mechanical headlight tester
Simple | Rugged | Versatile
Simple and rugged, the CAP2100 mechanical headlight tester quickly checks headlight alignment. Its alignment laser ensures precise positioning, its Fresnel lens focuses the beam on the test target, and its swivel column adapts to all vehicle sizes.
- Compatible with halogen, xenon, and LED
- Alignment laser
- Fresnel lens and alignment target
- 1.80 m graduated, swiveling aluminum pole
- 3-wheel base
Function :
Folding
Description
The mechanical headlight tester for easy headlight adjustment
The CAP2100 gets right to the point: an alignment laser to position the device facing the vehicle, a Fresnel lens that focuses the beam on the test target, and a direct reading of the adjustment.
It is designed for repair shops and garages that want to check and adjust low beams, high beams, and fog lights using reliable, easy-to-use equipment.
Key figures
CAP2100
Graduated, swiveling column
Measurement range for tilt
Mobile stand in the workshop
Lightweight and easy to handle
Precise alignment in just a few seconds
The laser projects the vehicle’s axis: the operator aligns the optical unit without trial and error. The Fresnel lens then projects the beam onto the target, where the cut-off position and the tilt angle can be read.
Suitable for all vehicles in the shop
The 1.80 m graduated aluminum column adjusts the height of the optical housing to match that of the headlight, from motorcycles to heavy vehicles. It swivels, making it easy to move from one headlight to the other, and the three-wheeled base allows the unit to be moved effortlessly.
Need on-screen measurements and a vehicle inspection procedure? Discover the CAP2500 electronic headlight tester.
Frequently Asked Questions About the CAP2100
What is the difference between a mechanical headlight tester and an electronic headlight tester?
The CAP2100 mechanical headlight tester projects the beam onto a target that the operator reads visually. Capelec’s electronic headlight testers, such as the photodiode-based CAP2500 or the camera-based CAP2600, measure and display values on the screen and incorporate inspection procedures.
Is the CAP2100 compatible with LED headlights?
Yes. The CAP2100 checks the alignment of halogen, xenon, and LED headlights.
What is the measurement range of the CAP2100?
The CAP2100 measures camber from +2% to -4%. It weighs 25 kg and measures 590 × 670 × 1,850 mm.
Specifications
Specifications
Specifics
Options
Applications
CAR REPAIR SHOPS & GARAGES
Verification of headlight alignment
Checking bulb intensity
Adjustment of low beams, high beams, and fog lights
Downloads
Capelec 2026 catalogue
The full Capelec range as a flipbook. Choose the edition for your market.